Saint Gobain Weberpral MF Fine Textured Through-Coloured Render - 25kg

Name: Saint Gobain Weberpral MF Fine Textured Through-Coloured Render - 25kg
Brand: Saint Gobain Weber
SKU: SGW-5114020

Code:

SGW-5114020

Brand:

Saint Gobain Weber

This Saint Gobain Weberpral MF is a highly durable weather and algae-resistant, fine-textured render and comes in four colour options, including Chalk, Ivory, Silver Pearl and Cream. This smooth render has been formulated to be spray applied and will deliver a contemporary loo... Read More

View full product details

Ask a question about this product

POA Enquire Online

Or call our friendly team on 01752 581 507

This item is not currently available to purchase.

View alternative products

View Transport Policy

View full product details

Ask a question about this product

Create a wishlist

Terry Ransome

Description

What's more, this Weberpral MF only requires one coat, saving you valuable time and effort on your project. It can be used as a part of Saint Gobain's Weber Monocouche range. The grain size is 0-1.5mm and can create a cleaner ashlar and quoin feature due to finer aggregate content. You can render brick or blockwork on entire elevations, feature panels or smaller areas, such as garden walls.

Features & Benefits: Saint Gobain Weberpral MF Fine Textured Through-Coloured Render - 25kg

Available in a variety of colours
Fine render texture
One coat for quick application
Weather and algae resistant
Formulated to be spray applied by render pump for faster application
Through-colour for low maintenance with no decoration required
1m² coverage per 25kg bag when applied at 15mm
12-month shelf life from manufacture date

To avoid dampness or discolouration, it is essential not to apply the rendering below the DPC and within 150mm of ground level. Ensure all surfaces are in good condition, clean, suitably dry and free of anything that may affect adhesion. The substrate must be appropriate for rendering with a 1:1:6 designation III mix.

This Weberpral MF can be applied to most suitably prepared masonry backgrounds. Mechanically mix it using clean water only. It is suitable for batch mixing or continuously mixing spray render machines. An appropriate drill and whisk can also be used when hand application is required. Gradually add the bag's contents to 3.7 to 4.7 litres of water and mix for 5 to 10 minutes. Do not over-mix. The substrates must have a suitable mechanical key for rendering.

Please note:

Bulk returns are not accepted, so it is advised to order a small sample order to ensure it meets your requirements.
Do not use where the substrate is hot or on elevations in direct sunlight. Do not apply in temperatures below 5°C (for dark colours 8°C) or above 35°C. This render is not suitable for application if frost is forecast within 24 hours or in damp or wet conditions. It is also not suitable for use on a construction board substrate (concrete particle board/render board) or insulation board substrate.
When kept unopened, in dry conditions and at temperatures above 5°C, the shelf life is 12 months from the manufacture date.