Saint Gobain Weberend Protect Coating for Render

Name: Saint Gobain Weberend Protect Coating for Render
Brand: Saint Gobain Weber
SKU: SGW-5092000

Code:

SGW-5092000

Brand:

Saint Gobain Weber

Available in 25 litre and 5 litre volumes, the Saint Gobain Weberend Protect Coating for Render is a durable coating that offers excellent protection against water, oil, and graffiti. While doing so, it also preserves the appearance of the render and allows it to breathe. Sain... Read More

View full product details

Ask a question about this product

POA Enquire Online

Or call our friendly team on 01752 581 507

This item is not currently available to purchase.

View alternative products

View Transport Policy

View full product details

Ask a question about this product

Create a wishlist

Mr Leber

Description

Saint Gobain Weberend Protect Coating for Render is highly hydrophobic and colourless, providing an excellent water repellent coating. As it enhances weather resistance and prevents water penetration, the water will bead off the surface. In result, it ensures a clean, dry render and also fends against the accumulation of dirt, stains, and other contaminants. This product has full compatibility with Deferral M, Deferral D, Weberpral MF, and Webertherm XP external wall insulation systems.

Features & Benefits: Saint Gobain Weberend Protect Coating for Render

Coverage varies on substrate porosity
Offers excellent protection against water, oil, and graffiti
Preserves the appearance of the render and allows it to breathe
Highly hydrophobic and colourless
Ensures a clean, dry render
Fends against the accumulation of dirt, stains, and other contaminants
Applied using a low-pressure spray, brush, or roller
Non-toxic and free of volatile organic compounds (VOCs)
UV resistant

Before starting the work, make sure the substrate is dry. Fix any pre-existing cracks and ensure it is completely clean, without any dust, dirt, oil, efflorescence, organic growth, or old paint films. Test the compatibility and calculate usage by applying a small quantity to a discrete area of the substrate.

Depending on the surface type, you can apply this product using a low-pressure spray (for high textured surfaces), brush, or roller. When applying the product on vertical surfaces, start from the bottom and work your way up to prevent it from running. If you need to apply multiple coats, make sure to do so while the previous coat is still wet within 10 minutes, as once the product is fully treated and dry, re-application is not advised at the risk of losing adhesion. The water repellence of the product will become noticeable after it cures, although it may take up to seven days for it to reach its maximum effectiveness.

Please note:

All surfaces must be treated in 1-3 wet on wet applications to ensure full effectiveness.
Don't use if rain is expected within four hours, during frost, or when surface and air temperature is lower than 5°C or higher than 30°C.
Don't use in damp or wet conditions (Substrate moisture should be a maximum of 5%).
Bulk returns are not accepted so it is advised to order a small sample order to ensure it meets your requirements.